There might be nothing more frustrating than having your Xbox controllers are amiss. If you discover your Xbox 360 controller is at fault, it is recommended to try fixing it before calling Microsoft for repairs or set you back the shop for the refund. Though some issues do require repair or replacement, many complaints are easily fixed within minutes. Follow this troubleshooting guide, and then you'll have your Xbox 360 system controller working again quickly in any respect. Problems: 1. The Xbox 360 console wireless controller can't connect or stay a reliable link to the Xbox 360 system; 2. Four green lights flash Beyond 15 Seconds When Connecting; 3. Error message: Please reconnect controller. Reasons: 1. Most of the time, it's due to an issue of lacking enough internal electric wifi extender redditbatteries to talk with the Xbox 360 system; 2. netgear universal wifi range extender setup Interference off their wireless devices; 3. Metallic objects are near by the Xbox 360 system controller; 4. The length between your Xbox 360 controller and Xbox is simply too far. Solutions: �T. Check the Batteries Xbox 360 system controllers are known for their battery issues. While the batteries of Xbox 360 system controller may not be badly as the Wii's with regards to draining power, they still require frequent changes. 1. Turn off your Xbox 360 system, wait a few minutes, and switch it on again by pressing the very center button about the Xbox 360 system controller. Take note of the ring of light around the center button; when it doesn't blink when you activate the Xbox 360 elite, you will need fresh batteries as well as to reconnect your controller. 2. Replace the batteries within your wireless Xbox 360 system controller by pushing the tab on top of the controller and pulling it compartment out. Guarantee the fresh batteries are inserted properly, and reconnect the battery compartment; it clicks how to connect a netgear universal wifi range extender back in place. 3. Re-sync your Xbox 360 controller to your console. Press the little round button next to the second memory unit port about the console. Then press the tiny round button on the top of the controller at the left shoulder button. Wait one minute for syncing; the ring regarding throughout the center button will blink although this happens. 4. Recharge your controller if using a rechargeable battery as outlined by their instructions. You may need to re-sync your controller after recharging. �U. Avoid Metal Large metallic objects could cause interference between your Xbox 360 console and also the wireless controller. Position yourself a minimum of one meter far from any large metal cabinets, tables, such as file cabinets, mirrors, and refrigerators to ensure there's no interference for the Xbox controller. And also this goes for any metallic decorations or stickers. �V. Channel Interference The most common problems with regards to smooth performance is interference business modern technologies. Cordless phones (2.4 GHz), wireless LANs, wireless video transmitters, microwaves, cell phones, Bluetooth headsets, and baby monitors also can cause issues to arise. Turn these off or unplug them and retry connecting to determine if performance is restored. �W.Move Closer Guarantee the front in the console is defined in the direction of the controller. The Xbox 360 system controller is made to work from a distance of 20 feet from your console. Achievable kind of range, it may seem you're safely from the required diameter. Still, whatever the instructions might say, distance matters. In the event the red lighting is flashing on your controller plus it won't connect, try moving 5 feet closer to see if it doesn't solve the challenge.